Fronius TransSteel 5000 - Control Elements and Connections

11
Connections, switches and mechanical components
TSt 3500/5000
power source
TSt 3500/5000 power source
No. Function
(1) (-) - current socket with bayonet latch
used
- for connecting the grounding (earthing) cable in MIG/MAG welding
- for connecting the electrode (or grounding/earthing) cable in MMA welding,
depending on the type of electrode being used
(2) Mains switch
for switching the power source on and off.
(3) (+) - Current socket with bayonet latch
used
- for connecting the current cable from the interconnecting hosepack in MIG/
MAG welding
- for connecting the electrode (or grounding/earthing) cable in MMA welding,
depending on the type of electrode being used
(4) Gas preheater (option)
(5) Blanking cover
(6) Gas test button (option)
(7) Mains cable with strain relief
(8) LocalNet connection
Standardised connection socket for the wire-feed unit (intermediary hosepack)
Rear viewFront view
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)