19
WARNING! An electric shock can be fatal. If the device is plugged into the
mains electricity supply during installation, there is a high risk of very serious
injury and damage. Only carry out work on the device when
- the mains switch is in the „O“ position,
- the device is unplugged from the mains.
„Commissioning“ comprises the following sections:
- Commissioning a TSt 3500/5000 power source
The steps and activities described below include references to various system compon-
ents, including
- Trolleys
- Cooling units
- Wire-feed unit holders
- Wire-feed units
- Interconnecting hosepacks
- Welding torch
- etc.
For more detailed information about installing and connecting the system components,
please refer to the appropriate operating instructions.
Commissioning
Safety
Information on
system compon-
ents
Overview
To Next Page
Loading...
