17
EN
Warning notices
on the device
There are warning notices and safety symbols on the wirefeeder. These warning notices
and safety symbols must not be removed or painted over. They warn against incorrect op-
eration, as this may result in serious injury and damage.
Warning notices affixed to the wirefeeder
Welding is dangerous. The following basic requirements must be met:
- Welders must be sufficiently qualified
- Suitable protective equipment must be used
- All persons not involved in the welding process must be kept at a safe distance
Do not use the functions described here until you have fully read and understood the fol-
lowing documents:
- These Operating Instructions
- All the Operating Instructions for the system components, especially the safety rules
1.0-25 m/min
360A/100% 450A/60% 500A/40%I
2
4.0 AI
11
U
11
24 V
U
12
I
12
2.0 A24 V
IP 23
IEC 60 974-5/-10 Cl.A
A-4600 Wels
www.fronius.com
Model No.
Ser. No.
Part No.
40,0006,3035
To Next Page
Loading...
