Fronius VR 5000 Remote - Connecting Welding Torch; Inserting Feed Rollers

25
EN
Connecting a
MIG/MAG welding
torch
1
* when the optional water connection and
the water-cooled welding torch are fitted
Inserting/replac-
ing feed rollers
CAUTION!
Danger from feed roller holders flying upwards.
This can result in severe injuries.
► When unlocking the clamping lever, keep fingers away from the area to the left and
right of the lever.
1 2
CAUTION!
Danger from exposed feed rollers.
This can result in severe injuries.
► Always fit the protective cover of the 4-roller drive after inserting or replacing a feed roll-
er.
1
2
1
4
4
5
6
3
1
6
3
31
2
4
5
7
2