Fronius VR 5000 Remote - Control Panel Operation (Pulse); Pulse Control Panel Overview

40
Pulse control panel (option)
General IMPORTANT! The Pulse control panel can only be operated in conjunction with the follow-
ing power sources:
- TransSteel 4000 Pulse
- TransSteel 5000 Pulse
The power source uses the Pulse control panel and certain general items of data such as
sheet thickness, filler metal, wire diameter and shielding gas to calculate the best welding
parameters. As a result, stored expert knowledge is available at all times. All the parame-
ters can be adjusted manually. The Pulse control panel also allows parameters to be set
manually.
Control panel
splitting
The Pulse control panel is split.
Pulse A control
panel
No. Function
(1) HOLD indicator
At the end of each welding operation, the actual values for welding current and
welding voltage are stored - the "HOLD" indicator lights up.
Pulse B
Pulse A
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(11)
(8)
(10)
(9)
(12)