Fronius Wattpilot Go 11 J Go 22 J Home 11 J
Humidity 5 - 95%
Height above sea level 0 - 2,000 m
Residual current
detection
The tripping characteristics of the residual current detection are as follows.
Spare parts - Miniature fuse, ceramic with sand filling, 5 x 20 mm.
Safety functions - RFID access control (ID chip, reset card)
- Theft-proof charging socket lock
- Cable protection (lock not included)
- Residual current device with DC detection, 30 mA
AC
, 6 mA
DC
- Phase and voltage testing of the input voltage
- Auxiliary contact on the relays for checking the switching function
- Earthing detection (can be switched off, Norway mode)
- Current sensor, 3-phase
- Miniature fuse for internal electronics (trips if supply line is connected incorrectly,
only use original miniature fuses)
- Adapter recognition with automatic reduction to 16 A (Wattpilot Go 22 J)
- Temperature monitoring
52
To Next Page
Loading...
Need help?
General
