Need help?Do you have a question about the Fronius Wattpilot Go 11 J 2.0 and is the answer not in the manual?
General| Brand | Fronius |
|---|---|
| Model | Wattpilot Go 11 J 2.0 |
| Category | Battery Charger |
| Language | English |
Explains safety notices, general safety guidelines, and requirements for personnel.
Details operational and storage conditions to avoid damage.
Specifies requirements for personnel performing installation and maintenance.
Discusses electromagnetic compatibility and potential interference issues.
Outlines user responsibility for safekeeping settings and manufacturer liability.
States copyright ownership and reserves the right to make changes.
Defines the proper and improper uses of the Fronius Wattpilot device.
Explains the meaning of symbols on the device and rating plate.
Describes how the scope of delivery varies depending on the product variant.
Lists optional accessories and their item numbers for the Wattpilot.
Comprehensive warnings covering operation, electromagnetic fields, housing, cables, and load.
Highlights cautions regarding excessive charging current and heat generation.
Lists compatible Fronius inverters and prerequisites for using Wattpilot functions.
Explains compatibility with external generators and necessary requirements.
Visual overview of components, symbols, card reader, and pushbutton functions.
Details usage of ID chips for personalization and the reset card for factory settings.
Explains how LEDs indicate system status, operating modes, charging current, and various fault conditions.
Introduces the Wattpilot's general charging capabilities and mode switching.
Explains automatic and manual switching between 1-phase and 3-phase charging.
Details using surplus PV energy for charging, including prerequisites and settings.
Explains power level settings for 1-phase and 3-phase charging and their increments.
Describes how to set priorities between Wattpilot, battery, and Ohmpilot.
Explains how to use flexible electricity tariffs for cost-effective charging.
Describes standard charging, where PV surplus and tariffs are not considered.
Explains Eco Mode for charging only when electricity is cheap or PV surplus is available.
Details charging to meet a specific range/time, considering cost.
Illustrates charging scenarios in Eco Mode and Next Trip Mode.
Provides guidelines for selecting a suitable location and correct installation position.
Step-by-step instructions for mounting the Wattpilot's bracket and anti-theft protection.
Details the electrical connection process for the Wattpilot, emphasizing safety.
Advises on connecting the Wattpilot outside backup power loads and vehicle compatibility checks.
Guides through the initial setup, self-test, and connection of the Wattpilot.
Explains how to stop the charging process and unlock the charging cable.
Describes how the Wattpilot communicates with Fronius inverters for PV surplus charging.
Introduces the app, its functions, and where to download it.
Guides on launching the app, setting up hotspots, connecting to WLAN, and adding devices.
Describes the main charging screen of the Fronius Solar.wattpilot app.
Explains how to view and download detailed charging consumption data per user.
Details setting charging current levels and configuring Next Trip Mode for optimized charging.
Covers settings for flexible tariffs, PV surplus, and price limits for cost-effective charging.
Provides advanced settings for PV surplus usage, car behavior, and charging timers.
Configures LED brightness, colors, time zone, and access management for security and operation.
Configures cable locking, earthing test, and manages ID chips for authentication.
Secures access with a password and configures country-specific grid settings.
Covers WLAN setup, hotspot password, and advanced internet connection settings.
Explains the Open Charge Point Protocol for charging infrastructure communication.
Details the process for updating the Wattpilot's firmware via the internet.
Provides details on residual current detection characteristics and safety functions.
Explains the default settings used by the Wattpilot during startup.
Lists the technical specifications for the Fronius Wattpilot Go 11 J 2.0 model.
Lists the technical specifications for the Fronius Wattpilot Go 22 J 2.0 model.
Lists the technical specifications for the Fronius Wattpilot Go 22 J 2.0 AUS model.
Lists the technical specifications for the Fronius Wattpilot Home 11 J 2.0 model.
Lists the technical specifications for the Fronius Wattpilot Home 22 J 2.0 model.
Lists status codes displayed by the Wattpilot and their corresponding causes.
Details causes and remedies for various status codes like plug failures, communication errors, and temperature issues.
Addresses problems with starting charging, no LEDs, or failed tariff updates.
Provides information on obtaining country-specific warranty conditions.
Details proper disposal procedures for waste electrical and electronic equipment.
To Next Page