Installation location and position
Choice of loca-
tion
The following criteria must be taken into account when choosing a location.
The Wattpilot is suitable for outdoor operation without direct
sunlight.
The Wattpilot is suitable for operation in a well-ventilated in-
door area.
Do not operate the Wattpilot in areas with increased danger as a
result of ammonia gases.
The Wattpilot is suitable for operation indoors and outdoors.
For environmental conditions, see Wattpilot Home 11 J 2.0 on page 65.
CAUTION!
Beware of warping of the mounting bracket on uneven surfaces.
An uneven surface can cause the mounting bracket to warp, making it impossible
to attach the Wattpilot.
▶
Select a suitable location on an even surface.
Installation posi-
tion
The Wattpilot is designed to be installed vertically on a vertical,
level wall.
-
Do not install the Wattpilot horizontally.
-
Do not install the Wattpilot on a sloping surface.
-
Do not install the Wattpilot on a sloping surface with the
connection facing down.
CAUTION!
Danger due to heat generation on the device!
The build-up of heat can lead to lasting damage and even fire.
▶
Observe the correct installation position.
▶
Never cover the device during charging.
▶
Unwind the cable completely from a cable drum.
33
EN
To Next Page
Loading...
Need help?
General
