EasyManua.ls Logo

Frye FONIX 7000 - Setup; Unpacking the FONIX 7000

Frye FONIX 7000
216 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16 FONIX 7000 Hearing Aid Analyzer
Otherwise, please report all safety related concerns to the Frye factory:
Frye Electronics, Inc.
9826 SW Tigard St.
Tigard, OR 97223
Ph: (503) 620-2722 or (800) 547-8209
Fax: (503) 639-0128
email: support @frye.com
sales@frye.com
Frye Electronics, Inc. is a Registered Firm of British Standards
Institution, and we conform to the ISO 13485 standard.
1.6 Setup
This section describes the unpacking and setup of the 7000 test system. A
description of the front and back panels is also included.
1.6.1 Unpacking the FONIX 7000
Remove the FONIX 7000 test system from the shipping cartons. Store the ship-
ping cartons in a dry place so that they can be used again in the event that the
unit must be returned to the factory for repair or upgrade.
See Figure 1.6.1 for a picture of the 7000 test system and a labeling of its basic
components.
Figure 1.6.1. Caption: The 7000 Test system.

Table of Contents