Frymaster FilterQuick Version 2 - Product Setup (Single Setpoint); Product Setup (Multiple Setpoint)

1-5
Left Display Right Display Action
RECOVERY
ALARM
DISABLED
Press  to scroll choices DISABLED and ENABLED. Press . (This is a
recovery alarm that locks out the fryer if it does not heat properly. Default is disabled.
BASKET
LIFT
DISABLED
Press  to scroll choices DISABLED and ENABLED. Press . Default is
disabled.
HOLD TIME AUTO
Press  to scroll choices AUTO and MANUAL. Press . (This is the hold timer
cancel alarm.) If set to auto, the alarm will auto cancel. Default is auto.
Exit Exit
Press  button once to return the controller to OFF.
Time/date Programming
OFF OFF
Press  until the controller scrolls INFO MODE, changing to MAIN and then
PRODUCT SETUP.
PRODUCT
SETUP
Press  to scroll to Vat setup and press .
VAT SETUP
Enter
code
Enter 1656.
SYSTEM
Press  to scroll to TIME/DATE.
TIME/DATE
Press .
TIME
ENTRY
Time
Use numbered keys to change time. Enter the time in 24 hour format. Press .
DATE
FORMAT
Mm/dd/yy
Press  to scroll choices. With the desired date format displayed, press .
ENTER
DATE
date
Use numbered keys to change date. Press .
EXIT Exit
Press the Exit/Scan button three times to return the controller to OFF.
DST SETUP
This is daylight savings time setup. In the United States, daylight saving time begins at 2:00 A.M. on the
second Sunday in March. Clocks move ahead one hour. Daylight saving time ends at 2:00 A.M. on the
first Sunday in November. Clocks move back one hour. For the two U.S. states and international
locations that do not use DST, set to disabled.
OFF OFF
Press  until the controller displays INFO MODE, changing to MAIN and then
PRODUCT SETUP.
PRODUCT
SETUP
Press  to scroll to Vat setup and press .
VAT SETUP
Enter
code
Enter 1656.
SYSTEM
Press  to scroll to DST Setup.
DST SETUP
Press 
DST Enabled
Press  to scroll choices DISABLED and ENABLED. Press . (Default is
enabled.) If disabled is chosen, pressing the  button, displays exit. Press the exit
scan button three times to exit.
DST START
MONTH
3
Enter the daylight savings time starting month using the 1-10 keys. (Default is US
starting month: 3.) Press .
DST START
SUNDAY
2
Enter the daylight savings time starting Sunday using the 1-10 keys. (Default is US
starting Sunday 2.) Press .
DST END
MONTH
11
Enter the daylight savings time ending month using the 1-10 keys. (Default is US
ending month 11.) Press .
DST END
SUNDAY
1
Enter the daylight savings time ending Sunday using the 1-10 keys. (Default is US
ending Sunday 1.) Press .
EXIT Exit
Press the Exit/Scan button three times to return the controller to OFF.
FILTER
OFF OFF
Press  until the controller scrolls INFO MODE, changing to MAIN and then
PRODUCT SETUP.
PRODUCT
SETUP
Press  to scroll to Vat setup and press .