1-4
1.3 Setup: Main Menu
Pressing and holding the checkmark key for 10 seconds produces the setup mode, which first displays Product Setup. Turn
the controller off and follow the steps below to navigate the options.
Left Display Right Display Action
OFF OFF
Start with the far left controller. Press and hold the (check) button until the controller
scrolls INFO MODE, changing to MAIN MENU and then PRODUCT SETUP.
Product Setup
Press to scroll to Product Setup, Vat Setup, Tech Mode, and Exit. With the desired
selection displayed, press .
Product Setup Used to program menu items and cooking parameters.
vat setup Vat set up is described below in section 1.4.
Tech Mode Tech mode is used to enable and disable Cooks and Filters options.
Exit Exit Press Exit/Scan button to return the controller to OFF.
1.4 Vat Setup
Vat Setup mode allows the controller to be set for language displays, vat sizes, and temperature range displays. With the
controller OFF, follow the steps below. *NOTE: Most of the system choices are only available on the far left (Master)
controller. Vat type, Cool Mode Default and Basketlift are only available on other controllers.
Left Display Right Display Action
OFF OFF
Start with the far LEFT controller. Press and hold the (check) button until the
controller scrolls Info Mode, changing to MAIN MENU and then PRODUCT
SETUP.
PRODUCT
SETUP
Press to scroll to Vat setup and press .
VAT SETUP
Enter
code
Enter 1656.
SYSTEM
Press .
Language English
Press to scroll to choice and press .
2nd
language
SPANISH
Press to scroll to choice and press . (This option allows another language to
be toggled from the front panel. (ex. Spanish as a second language.) Default is
Spanish.
Locale Non-CE
Press to scroll to choices: CE (European Conformity standards), or Non-CE
(non-European standards) and press . This option is available only on the far left
controller.
Energy Gas
Press to scroll to choices: Gas or Electric and press . This option is available
only on the far left controller.
Type GL30 Full
Press to scroll choices: Gas- GL30 Full, GL30 Split, GL30 Full OSP, GL30
Split OSP, 11814 Full Electric- EL30-14 Full, EL30-14 Split, EL30-17 Full, EL30-
17 Split, 11817 Full. With the current fryer vat type displayed, press .
SYSTEM
volume
5
Sets sound level for controller. Enter level, 1-9 (1=Lowest/ 9=Loudest). Press .
Tempr
format
F
Press to scroll choices: F for Fahrenheit; C for Celsius. Press .
Exit Melt
Tempr
180º
(82 ºC)
Use numbered keys to change default setting. Press . (This is the temperature for
the fryer to exit the melt cycle.) Range is 100°F (38°C) to 200°F (93°C). Default is
180°F (82°C).
COOL MODE
TEMPR
250F (121
ºC)
Use numbered keys to change default setting. Press . (This is the temperature
during setback or idle mode.) Default is 250°F (121°C).
COOL MODE
DEFAULT
0
Use numbered keys to change default setting. (This is the amount of minutes the
fryers sits idle before going to cool mode. The default, 0, disables the feature.) Press
.
FRESH OIL JIB
Press to scroll choices JIB or Bulk. Default is JIB. Press .
WASTE SDU
Press to scroll choices SDU, BULK or FRONT. Default is SDU. Press .
To Next Page
Loading...
