1-23
Left Display Right Display Action
press either arrow under CONFIRM.
START POLISH
Press button with blinking LED.
DRAINING
None required.
POLISHING 15:00 countdown timer
None required. The oil flows from the filter pan to the frypot and
back to the filter pan for 15 minutes. Default is 15 minutes.
FILLING
None required.
-------- or LOW
TEMP alternating
with the temperature.
-------- or LOW
TEMP alternating with the
temperature.
Fryer starts heating back to temperature.
1.11 SCAN Mode
The daily stats mode can be used to see current stats about any product quickly throughout the day. Follow the steps below
to view stats.
Left Display Right Display Explanation/Action
READY READY
Press the Exit/Scan button.
SELECT
PRODUCT
Press a product button to check daily stats.
Long name
8 character product name Press to progress to next product stat.
Short
Name
4 character abbreviated
product name
Press to progress to next product stat.
COOKS
REMAINING
Number or DISABLED Number of cooks remaining until filter prompt. Press .
COOKS
TODAY
Number Number of cooks completed today. Press .
COOKS
SINCE LAST
DISPOSE
Number Numbers of cooks since last dispose. Press .
1 TIME
Time Time that product is programmed to cook. Press .
1 TEMPR
Temperature Temperature that product is programmed to cook. Press .
1
Sensitivity
Number The level of sensitivity the product is programmed to cook at. Press .
1 ALARM
TIME
*
Shake Time The time during a cook till a product shake alarm occurs. Press .
1 ALARM
NAME
*
Shake, stir, or
numbered alarm
This is the name of the alarm. Press .
1 ALARM
MODE
*
AUTO or MANUAL
The alarm mode the product is programmed with. Press .
1 ALARM
TONE
*
Short, medium,
long, double or
The shake alarm tone the product is programmed with. Press .
To Next Page
Loading...
