FSI DM160 - Page 25

© 2023 Flanders Scientic, Inc.
25
Return to Table of Contents
Scopes & Audio Meters Menu
Main Menu Scopes & Audio Meters
Function Scopes & Audio Meters Prole 1
Real Time Scopes Window 1 Luminance
Scopes & Audio Meters Window 2 Vector
Video Waveform Position Bottom Right
Audio Scopes Stack Horizontal
Marker Waveform Scale IRE Level
Alarm Audio Display Mode Pairs
OSD Alignment Level -18 dBFS
GPI Permitted Max Level -9 dBFS
Color Management Audio Display Channels 1-16
System Ballistics True Peak
System Status Peak Hold Time 2
Support
Waveform Scale
This option allows you to choose what type of scale is used on the Waveform Monitor. You may select from V Level (for a
voltage based scale), IRE Level (for an IRE based scale 0-100), or Digital Level (for a 8 bit digital level based scaled, 0-255).
Audio Display Mode
This option can be set to either Groups or Pairs. When organized in pairs the odd channels will be displayed on the left side
of the screen and even channels of the right side of the screen. When organized in groups the channels will be arranged
with all channels of an Audio Group displayed on the same side of the screen together.
Alignment Level
Allows audio level meter alignment level to be set to -12dBFS, -14dBFS, -16dBFS, -18dBFS or -20dBFS, -22dBFS.
Permitted Max Level
Allows you to specify the Max Audio Level for your on-screen Audio Level Meters: Select from: -10 dBFS, -9 dBFS, -8 dBFS,
-7 dBFS, -6dBFS, -5dBFS.
Audio Display Channels
Allows you to select the Audio Level Meters Channels that will be shown on the Vertical or Horizontal Audio Level Meters.
Select from Channels 1-2, 1-8, 9-16, or 1-16.
Ballistics
This allows you to select the type of Audio Level Meters to display. You
can select from PPM Type I, PPM Type II, or True Peak.
Peak Hold Time
Allows you to specify the number of seconds that a peak audio level will be held (shown) by the Audio Level Meters.
NOTE: The Scope & VU Meters
Menu only sets your Waveform,
Vector, & Audio Level Meter
display preferences. To toggle
the on-screen display of your
congured Scopes & VU Meters
proles assign the Scopes & VU
Meters proles to specic keys.
See the Function Menu section
of this manual for more details.