- 26 -
9.Self check of the SD memory card
Self check of the SD memory card can be made in this operation. If there is no problem, the display will be unchanged.
10. Error message of SD memory card and cancellation method
When the record of SD memory card is in valid status and writing command is directed, and if the writing was not normally
carried out such as the SD memory card is not inserted in place etc., the operation will be stopped with abnormal status
after the occurrence of error. In this case, the alarm [9] is displayed and REC lamp continuously lights up.
For cancellation, confirm the status of SD memory card, after count for 5 seconds, and push the reset key.
Important: If REC lamp is turned off, the writing is completed. If the REC lamp is still turned on, the system wil
l not be operated even switched to the [Die matching] position.
Error No. indication of SD memory card
Error status of the SD memory card is displayed. By reset operation, writing to the card will be re-executed.
Important: Please pay attention that if [00] is put in the error number and above operation is carry out, the error
objective data will be deleted.
Error Error description
Error 01
SD memory card is not set to the main body. Please reconfirm whether or not that SD memo
ry card is in the SD card slot or properly be inserted once again.
Error 02
Formatting error. Formatting of SD memory card was failed. Please carry out the format of S
D memory card once again after the error cancellation.
Error 03 Compatibility of the type of format is not met. Format type of the CP-2 is FAT16.
Error 04 Processing of SD memory card is not ready yet.
Error 33 SD memory card is in the write protect status.
Error 88 CP-2 readable file is not existed. (In the case that original file is not available)
Error 8B
This is the error displayed when the number of SD memory card data file is going to exceed
the allowed range.
Error 8C Data cannot be filed as free space of the SD memory card is not available.
Error 91 Data file is in the mode of reading only attribution.