FUJI CONTROLS CP-2 User Manual

- 25 -
: SD (SDHC, SDXC is incompatible)
: Data capacity is up to 2GB
5. Time setting
Current date and time to be recorded in the SD memory card is set.
The date and time is set when shipped from the factory, however, please carry out the fine adjustment if it is necessary.
Example of set-up: Time at 9:30 on May 28, 2012
Setting of Christian era
Setting of date
Setting of time
6. Change of the renewal number of the measured file (Initial value: 1000 times)
The renewal number of the measured file is changed from 1000 times for 1 file to 10000 times.
7. Finish of measured file recording
Data file of measured results recorded in the SD memory card can be finished with the record made so far by this operation.
Once this operation is carried out, the next measured result will be recorded to the new file from the count 1.
8. Format of the SD memory card
Format of SD memory card can be made in this operation.
In the case that the format is made by the other method, type of format cannot be matched to the CP-2 and may result the
delayed processing speed. Therefore, please always carry out the format with this operation. (Approx. 5 seconds)

FUJI CONTROLS CP-2 Specifications

General

Brand	FUJI CONTROLS
Model	CP-2
Category	Controller
Language	English