Fuji Electric FRENIC-Multi Series User Manual

1-6
1.3.6 Option terminals
CM XA XB XZ PO CM YA YB YZ PO PI CM
Screw size: M2
Tightening torque: 0.22 to 0.25 N·m
Figure 1.8 Option Terminals
Terminal [PLC] on the PG interface card cannot supply power to external equipment.
Use the terminal only for receiving power from external equipment.

Fuji Electric FRENIC-Multi Series Specifications

General

Brand	Fuji Electric
Model	FRENIC-Multi Series
Category	Inverter
Language	English