4-1
Chapter 4 PG INTERFACE CARD FUNCTIONS
The combination of the PG interface card and the PG (open collector or complementary output)
makes feedback signals available, enabling the following controls.
4.1 Speed Control
This refers to speed control with PG. (For details, refer to Chapter 6.)
4.2 Frequency Control with Pulse Rate Input
This control specifies a frequency command with pulse trains. (For details, refer to Chapter 5.)
It can be used together with speed control with PG at the same time.
4.3 Positioning Control
This refers to simplified positioning control that detects the pulse count with feedback signals sent
from the PG. (For details, refer to Chapter 7.)
This control can be used together with speed control with PG and frequency control with pulse rate
input at the same time.
To Next Page
Loading...
Need help?
General
