– 32 –
Specification
Power voltage: 100 (- 15%) to 240V AC (+10%), 50/60Hz
Power consumption: 15V AC or less/240V AC
Relay contact output: Control output 1: SPDT contact, 220VAC /
30VDC 3A (resistive load)
Control output 2: SPST contact, 220VAC /
30VDC 3A (resistive load)
SSR/SSC driving output: ON: 24V DC (17 to 25V DC)
(voltage pulse output) OFF: 0.5V DC or less
Maximum current ; 20mA or less
Resistive load 850W or more
4-20mA DC output: Allowable load resistor 600W or less
Alarm output (up to 2 outputs): Relay contact (SPST contact) 220V AC /
30V DC 1A (resistive load)
Heater disconnection alarm output: Relay contact (SPST contact) 220V AC /
30V DC 1A (resistive load)
Communication function : RS-485 Modbus interface
Transmission system ; Half-dueplex bit serial
start-stop synchronization
Transmission rate ; 9600bps
Transmission protocol ; In conformity to Modbus RTU
Transmission distance ;Up to 500m (total length)
Connectable units ; Up to 31units
Digital input : Number of input;1 input
Input contact capacity ; 5V, 2mA DC
Ambient temperature: -10 to 50°C
-10 to 45°C (when side by side mounting)
Operating ambient humidity: 90%RH or less (no condensation)
Preservation temperature: -20 to 60°C
Modbus RTU : A trademark of Modicon Corp.,USA
To Previous Page
Loading...
