-15-
iii Finisher A
Outputting Paper
Extension Tray
To eject SEF paper, pull out the Extension Tray and guide wire.
Roller-shaped trace may be left on coated paper.
Staple Cartridge
Replacing Cartridge
Consumables recommended by Fuji Xerox are manufactured under the standards suitable for this machine.
Using consumables not recommended by Fuji Xerox may affect print quality or performance provided by the
product. Use consumables that Fuji Xerox recommends for this machine.
Staples type XE (2PCS)
1.
Confirm that the machine is not operating, and open
the front door.
2.
Remove the cartridge.
3.
Pinch both sides of the empty staple case ( ) and
remove it from the cartridge ( ).
Important
If there are still staples in the staple case, you cannot
remove the staple case. Forcefully removing the sta-
ple case may cause malfunction.
1
2
To Next Page
Loading...
Need help?
General
