-33-
v Finisher C
Number of sheets that can be stapled (approximation)
Outputting Paper
Select the ejection destination using the printer
driver.
Roller-shaped trace may be left on coated
paper.
Output Tray
Paper is normally ejected to this tray.
Finisher Tray
You can only eject paper to this tray in case of side
stitch.
Booklet Tray
You can only eject paper to this tray in case of saddle stitch / Bi-Fold.
Equipped in case of Finisher with Booklet Maker.
Staple Cartridge
Replacing Cartridge
Consumables recommended by Fuji Xerox are manufactured under the standards suitable for this machine.
Using consumables not recommended by Fuji Xerox may affect print quality or performance provided by the
product. Use consumables that Fuji Xerox recommends for this machine.
Paper Weight (g/m
2
)
Side Stitch Saddle stitch
Uncoated Coated Uncoated Coated
52 to 63 50/65 x 16 x
64 to 90 50/65 x 16 x
91 to 105 30 x 7 x
106 to 128 25 15 7 7
129 to 150 20 10 7 7
151 to 176 15 7 7 7
177 to 220 10 5 5 5
221 to 300 3333
X: Ejection is not available.
Output Tray
Finisher Tray
Booklet Tray
To Next Page
Loading...
Need help?
General
