-26-
Reference Guide Optional Units
Staple Jams
If paper is not being stapled or if staples are bent, follow the procedures mentioned in the following pages.
If the issue isn’t resolved even after the procedure, contact our customer support center or sales agency.
If the staple looks like any of the following images, contact our customer support center or sales agency.
Depending on the usage condition, such as the paper type, staples may be bent or bent staples may be
caught inside of the unit, causing paper jamming.
If you open the Staple Cartridge cover, be sure to remove all bent staples. Not removing bent staples may
cause staple jamming. Only open the Staple Cartridge cover when you are removing the jammed staples.
Staple cartridge for side stitch
In case of jammed staples when using the Staple cartridges for saddle stitch, contact our customer support
center or sales agency.
1.
Confirm that the machine is not operating, and open
the Front Door.
Please be very careful not to hurt your fingers, etc. when removing the jammed staple.
Paper is not stapled Staple is bent
One side of the staple is
loose
Staple is bent in the wrong
direction
Staple is loose Staple is loose, and
the center sinks
Staple is collapsed
To Next Page
Loading...
