Fuji Xerox DocuCentre-IV 3065

Simple Fax
167
Fax
4
Simple Fax
You can select [Fax/Internet Fax] or [Simple Fax] on the [Services Home] screen to set
the features for the Fax service.
This section describes the features you can select on the [Simple Fax] screen. [Simple
Fax] allows you to use only basic features to easily send faxes. The following shows
the reference section for each feature.
Specifying a Destination Using the Numeric Keypad ............................................................. 167
Speed Dialing (Specifying a Destination Using an Address Number) .................................... 168
Specifying a Destination Using a One Touch Button .............................................................. 169
Resolution (Specifying the Scanning Resolution) ................................................................... 170
Original Type (Selecting the Document Type) ........................................................................ 170
2 Sided Scanning (Transmitting 2-sided Originals)................................................................. 171
1 Select [Simple Fax] on the [Services Home]
screen.
Note • [Simple Fax] is not displayed on the
[Services Home] screen when the Server
Fax service is enabled.
2 Select a feature on the [Simple Fax] screen.
Note • For the Simple Fax service, you can only
set [Resolution], [Original Type], and [2
Sided Scanning]. In addition, when you use this service, [Mixed Sized Originals] is set to
[On], and [Transmission Header Text] is set to [Display Header]. If you want to set the other
options, use [Fax/Internet Fax] on the [Services Home] screen to send faxes.
• You cannot switch between [Fax/Internet Fax] and [Simple Fax]. To switch one to another,
you must return to the [Services Home] screen. Once you return to the [Services Home]
screen, the settings you have made in [Fax/Internet Fax] or [Simple Fax] will be cleared.
Specifying a Destination Using the Numeric Keypad
Specify a destination using the numeric keypad.
1 Enter a fax number using the numeric
keypad.
Note • If you have entered an incorrect value,
press the <C (Clear)> button and enter
the correct value.
123
456
789
0#
C
Numeric keypad