Selecting the Printing Options
339
Media Print-Text
9
Selecting the Printing Options
You can set the printing options on the [Media Print - Text] or [Media Print - Photos],
and [Advanced Settings] tabs.
By default, pressing the <Custom 3> (Review) button on the control panel allows you
to view a list of the setting values.
Media Print - Text
Note • When you select a paper size smaller than the document size, the document image is
automatically reduced. When you select a paper size larger than the document size, the
document is printed at its original size.
• The features displayed on the [Media Print - Text] and [Advanced Settings] screens may
vary depending on the combination of the optional components installed on the machine.
Tab Item Setting Value
- Quantity Specify the number of print sets in the range of
1 - 999, using the numeric keypad.
Media Print Text Paper Supply Trays 1 - 5
Note • Select [Auto Select] or the tray in which
any of the following sizes of paper is
loaded: A3, B4, A4, A4 , B5, B5 , A5,
A5 , 8.5 × 11", 8.5 × 11" , 8.5 × 14",
11 × 17"
• When you select [Auto Select], the
machine automatically selects a tray that
contains the same size of paper as the
document, and prints the document at its
original size.
• When the desired tray is not displayed,
select [More], and on the screen
displayed, select the tray.
If you select [More] and then [Bypass], you can
set [Paper Size] and [Paper Type].
z
Paper Size
A3, B4, A4, A4 , B5, B5 , A5, A5 ,
8.5
× 11", 8.5 × 11" , 8 × 14", 11 × 17"
z
Paper Type
Select the paper type to be used from the list.
2 Sided Printing Off, Long Edge Flip, Short Edge Flip
Output Specify the stapling/punching positions.
When the desired stapling/punching positions are
not displayed, select [More].
Important • If you select and print multiple documents,
all of the documents are stapled together.
To staple only one document, print only
that document.
Advanced Settings Pages per Side Off, 2 Pages, 4 Pages
Bitmap Smoothing Off, On
To Next Page
Loading...
