Store to WSD
277
Scan
5
Store to WSD
This section describes the procedure to select features on the [Store to WSD] screen.
The Store to WSD service allows you to scan documents set on the machine from a
network computer. It also allows you to save the scanned data to a network computer.
Note • [Store to WSD] may not appear on the [Services Home] screen for some models. For more
information, refer to "9 Scanner Environment Settings" > "Configuration of Store to WSD" in
the Administrator Guide.
• This feature requires the scanner driver included as standard in Windows Vista Service
Pack 2 or later. Thus, this feature is not available for computers with older OS.
• Resolution, file format and so on cannot be specified from the control panel of the machine.
Specify these settings in [Scan Profiles] of Windows. For more information on how to
specify the settings, refer to Windows Help.
1 Select [Store to WSD] on the [Services
Home] screen.
2 Select a feature on the [Store to WSD]
screen.
Start Scan Job From
Select from where to start a scan job.
z
Computer
Starts a scan job by sending a request
from a network computer.
z
This Device
Starts a scan job with the scan command
from the machine, and save the scanned data to a network computer.
List of Computer
z
Lists network computers and their scanning methods. Select one from this list as
destination.
Computer (Starting a Scan Job via Computer Operation)
You can scan documents set on the machine by sending a request from a network
computer.
1 Select [Computer].
To Next Page
Loading...
