Broadcast
219
Fax
4
Note • You can specify up to 20 locations for relay recipients.
F Code Method
When using the machine as the initiating station for performing Remote Relay
Broadcast, confirm the F Code and the password (if necessary) for the primary relay
station.
Important • When using the F Code method for Remote Relay Broadcast, the primary relay stations and
secondary relay stations must support our F Code method and the Relay Broadcast feature.
Note • When performing Relay Broadcast with Fuji Xerox manufactured machines that can be used
as both an initiating station and a relay station, we recommend that you use the fax signal
method.
1 Select the [Fax/Internet Fax Options] tab to
display the [Fax/Internet Fax Options]
screen.
2 Select [F Code].
3 Select [On].
4 Select the [F Code] box, and enter the F
Code with the numeric keypad.
Note • You can enter up to 20 digits for the F Code.
z
Relay Broadcast
The number of digits of the primary relay station ID:
1: When the primary relay station IDs and address numbers are two digits
2: When the primary relay station IDs and address numbers are three digits
z
Print Directive
Printing/not printing at the primary relay station
Relay Broadcast Print
Directive
Primary
Relay
Station ID
Address
Number
Address
Number
....
Up to 20 digits
To Next Page
Loading...
