Loading Tab Paper/Postcards/Envelopes
65
Paper and Other Media
2
6 Likewise, load the remaining envelopes in the
tray and align the bottom edge of the
envelopes (not the flap side) in the arrow
direction (1). Pinch the left short-side paper
guide and slide it to the desired paper size (2).
Important • The number of sheets that can be loaded
varies depending on the type of the
envelope. For more information, contact our
Customer Support Center or our customer
engineers.
• If envelopes loaded in the tray are 10 sheets
or less, the guides apply more pressure to the
envelopes. It may cause distortion of the
envelopes, and may cause paper jams.
• When loading envelopes, neatly align all
edges. Also, if the envelopes loaded are
tipped, reduce the number of envelopes
loaded.
• Position the guides correctly to match the
envelope size. Otherwise, the envelope may
not be fed properly, resulting in paper jams.
7 Push the tray in gently until it stops.
Note • When removing the Post Card Kit from the
tray, completely loosen the screw before
removing the kit. Place the removed Post
Card Kit back to its original location (1). Then,
tighten the screw for storing (2).
To Next Page
Loading...
Need help?
General
