Stapler Faults
323
6. Remove the jammed staples
together with the staple sheet.
WARNING: Be careful when
removing jammed staples to avoid
hurting your fingers.
NOTE: When removing jammed
staples, also remove the staple
sheet. Do not remove unused
staples from the staple cartridge.
7. Close the lever on the front of
the staple cartridge until you
hear it click into place.
8. Lower the lever to return the
staple cartridge to its original
position until you hear it click
into place.
9. Close the Light Finisher's front
cover.
NOTE: A message will be displayed
and the machine will not operate if
the B Finisher's front cover is even slightly open.
• If the staples cannot be removed after carrying out the above procedures, contact
our Customer Support Center.
To Next Page
Loading...
Need help?
General
