A.6 Installing Additional Memory 223
The installation is now complete.
Note
• You can check whether the memory card is installed correctly by printing out the [Printer Settings] list.
[Memory Capacity] under [General] shows the total memory capacity of the printer (which is the memory
on the controller board (128 MB) plus the memory you just added). For information on how to print the
[Printer Settings] list, refer to " Printing a Report/List" (P. 171).
• If you install the memory while the printer is in use, change the memory capacity setting on your print
driver. For details, refer to the online help provided for the print driver.
To Next Page
Loading...
