Fuji Xerox DocuWide 6035 User Manual

9Problem Solving
180
Problem Solving
9
Unwanted black
lines are printed.
Is the scanning area soiled? Clean the scanning area.
See • "Cleaning the Machine" (P.172)
Internal components are
soiled.
Contact your Fuji Xerox Customer Support
Centre.
Unwanted white
dots appear in
black filled areas.
Is the correct type of media
used?
Load a correct type of media.
See • "Loading Media" (P.41)
Internal components are
soiled.
Contact your Fuji Xerox Customer Support
Centre.
Printed toner
smudges when
rubbed with your
finger.
Toner is not
fused to the
paper.
The paper is
soiled with toner.
Is the media damp? Replace with media just unpacked.
See • "Loading Media" (P.41)
Is the correct type of media
used?
Load a correct type of media.
See • "Media Type" (P.39)
Are the media settings cor-
rect?
Select correct media.
See • "Media Settings" (P.44)
The entire paper
area is printed
black.
The high voltage power sup-
ply may be the cause of the
problem.
Contact your Fuji Xerox Customer Support
Centre.
Nothing is
printed.
Is the document placed face
up?
Place the document with the side to be
scanned facing down.
The high voltage power sup-
ply may be the cause of the
problem.
Contact your Fuji Xerox Customer Support
Centre.
Symptoms Check Remedy

Fuji Xerox DocuWide 6035 Specifications

General

Brand	Fuji Xerox
Model	DocuWide 6035
Category	All in One Printer
Language	English