3
WIRING
3-26
n Positioning module (NC1F-VP1)
Example of connection with positioning module for MICREX-F series F70. Linear positioning can be
executed.
- The pulse string of NC1F-VP1 is open collector output.
- The output form is forward rotation pulse and reverse rotation pulse in the factory setting.
- The automatic start signal does not become valid if the MON output is left active.
- MOFF in the same scanning cycle as activation of MON is not valid.
Controller side
A6
A7
B7
A10
B10
A9
A8
B8
A11
B11
A12
B12
B4
B9
A4
B3
A3
A2
B2
A1
B1
M24
P24
M24
P24
⑤
⑥
①
②
③
④
DC24V
⑧
⑦
⑧
⑦
Positioning module
[NC1F-VP1]
+12 to 24 V
+12 to 24 V
Common
+ 5 V
+ 5 V
End of positioning
Ready
Common
Reverse rotation pulse
Common
Forward rotation pulse
Common
External mark
Common
Origin LS
External interrupt
Emergency stop
+ OT
- OT
+12 to 24 V
+12 to 24 V
Connect the shielding
wire at both ends.
To Next Page
