Security functions
If you do not want to make any other settings, you can exit BIOS Setup Utility.
► Select the Save Changes and Exit option in the Exit menu.
► Select Yes and press the Enter key.
The notebook is rebooted and the new password is effective. If you now want to call up the BIOS
Setup Utility, you must first enter your supervisor or user password. Please note that you only have
access to a few BIOS settings with the user password.
Changing the supervisor or user password
In order to change the Supervisor password you need to be logged into the BIOS Setup Utility using
the existing Supervisor password.
► Enter the BIOS Setup Utility again.
► Follow the steps for setting the supervisor password.
Cancelling passwords
To cancel a password (without setting a new password) run the following steps:
► Call the BIOS Setup Utility and go to the Security menu.
► Mark the Set Supervisor Password or Set User Password field and press the Enter key.
► Under Enter Current Password, enter your current password and confirm it by pressing the Enter
key.
► In the Enter new Password and Confirm new Password field, only press the Enter key.
► Select the Save Changes and Exit option in the Exit menu.
► Select Yes and press the Enter key.
Your notebook will now restart and the password is cancelled.
With the supervisor password you simultaneously deactivate the user password.
10600718714, edition 1 41
To Next Page
Loading...
Need help?
General
