Fujitsu ASUH12LMAS - Contents of function setting

¢
Contents of function setting
Each function setting listed in this section is adjustable in accordance with the installation environ-
ment.
NOTE: Setting will not be changed if invalid numbers or setting values are selected.

Function setting list
Function no. Functions
1) 00 Remote controller address setting
2) 11 Filter sign
3) 30/31 Room temperature control for indoor unit sensor
4) 35/36 Room temperature control for wired remote controller sensor
5) 40 Auto restart
6) 42 Room temperature sensor switching
7) 44 Remote controller custom code
8) 46 External input control
9) 48 Room temperature sensor switching (Aux.)
10) 49 Indoor unit fan control for energy saving for cooling
11) 60 Switching functions for external output terminal
12) 61 Control switching of external heaters
13) 62 Operating temperature switching of external heaters
14) 66 Outdoor temperature zone boundary temperature A
15) 67 Outdoor temperature zone boundary temperature B
16) 71 Standby time for auxiliary equipment operation
17) 72 Heat pump backup setting
18) 73 Emergency heat for external output terminal
19) 94 Fixed operation mode switching
20) 95 Heat insulation condition (building insulation)
- 53 -
11-1. Function settings by using remote controller
11. Function settings
WALL MOUNTED ASUG09-12LMAS WALL MOUNTED ASUG09-12LMAS