Fujitsu CELSIUS H7510 - First-Time Device Setup; Unpacking and Device Check

Page 20 of 52
Only intended for authorised service technicians
Removing the fan
Required work steps:
■ Removing the battery
■ Removing the service door
Required tools:
■ Screwdriver: Phillips PH00
► Remove the three screws M2.5XL6 (yellow circles).
► Remove the fan cable (yellow arrows) from the mainboard.
► Remove the cable from the mainboard (blue arrow) and disconnect it.
► Remove the fan on the right first, then the one on the left.
Return to Table of Contents