Fujitsu CELSIUS H7510 - Removing the Lower Assy

Page 25 of 52
Only intended for authorised service technicians
Removing the lower assy
Required work steps:
■ Removing the battery
■ Removing the service door
■ Removing the 2.5” HDD
■ Removing the LTE module
■ Removing the WLAN module
Required tools:
■ Screwdriver: Phillips PH00
■ Plastic tool
► Remove the 15 screws M2.5XL6 (yellow circles).
► Disconnect the WLAN and LTE antennae (yellow arrows).
► Carefully loosen the lower assy from the upper assy with the plastic tool and remove the lower assy.
Return to Table of Contents