Fujitsu CELSIUS H7510 - Memory Card Usage

Page 41 of 52
Only intended for authorised service technicians
Removing the LCD panel
Required work steps:
■ Removing the battery
■ Removing the service door
■ Removing the fan
■ Removing the keyboard
■ Removing the M.2 module of the keyboard
■ Removing the 2.5” HDD
■ Removing the LTE module
■ Removing the WLAN module
■ Removing the lower assy
■ Removing the M.2 module under the service door
■ Removing the mains connection cable
■ Removing the mainboard
■ Removing the USB / audio sub board
■ Removing the display
■ Removing the LCD front cover assy
Required tools:
■ Screwdriver: Phillips PH00
► Remove the four M2XL2.5 screws (yellow circles) and flip the LCD assy forwards.