Fujitsu CELSIUS H7510 - SIM Card Installation

Page 43 of 52
Only intended for authorised service technicians
Removing the LCD hinges
Required work steps:
■ Removing the battery
■ Removing the service door
■ Removing the fan
■ Removing the keyboard
■ Removing the M.2 module under the keyboard
■ Removing the 2.5” HDD
■ Removing the LTE module
■ Removing the WLAN module
■ Removing the lower assy
■ Removing the M.2 module under the service door
■ Removing the mains connection
■ Removing the mainboard
■ Removing the USB / audio sub board
■ Removing the display
■ Removing the LCD front cover assy
Required tools:
■ Screwdriver: Phillips PH00
► Remove the six M2.5XL3 screws (yellow circles) and remove the hinges.
Return to Table of Contents