Fujitsu CELSIUS H7510 - Battery Management and Maintenance

Page 36 of 52
Only intended for authorised service technicians
Removing the sub board switch
Required work steps:
■ Removing the battery
■ Removing the service door
■ Removing the fan
■ Removing the 2.5” HDD
■ Removing the LTE module
■ Removing the WLAN module
■ Removing the lower assy
■ Removing the M.2 module under the service door
■ Removing the mains connection
■ Removing the mainboard
Required tools:
■ Screwdriver: Phillips PH00