Fujitsu CELSIUS H7510 - Keyboard and Touchpad Operations

Page 27 of 52
Only intended for authorised service technicians
Removing the TPM module (Nation Z)
Required work steps:
■ Removing the battery
■ Removing the service door
■ Removing the 2.5” HDD
■ Removing the LTE module
■ Removing the WLAN module
■ Removing the lower assy
Required tools:
■ none
► The standard TPM module (yellow frame) is permanently soldered to the mainboard.
► The TPM module (Nation Z) (blue frame) is optional and placed on the mainboard.
Return to Table of Contents