Fujitsu CELSIUS H7510 - Removing the Display

Page 38 of 52
Only intended for authorised service technicians
Removing the display
Required work steps:
■ Removing the battery
■ Removing the service door
■ Removing the fan
■ Removing the keyboard
■ Removing the M.2 module under the keyboard
■ Removing the 2.5” HDD
■ Removing the LTE module
■ Removing the WLAN module
■ Removing the lower assy
■ Removing the M.2 module under the service door
■ Removing the mains connection
■ Removing the mainboard
■ Removing the USB / audio sub board
Required tools:
■ Screwdriver: Phillips PH00
► Disconnect the WLAN and LTE antennae (yellow arrows).
► Remove the screw M2.5XL6 (yellow circle).
► Turn the upper assy by 90° (green arrows) and remove it.
Return to Table of Contents