Fujitsu CELSIUS H7510 - Selecting a Suitable Location; Connecting the Mains Adapter

Page 21 of 52
Only intended for authorised service technicians
Removing the keyboard
Required work steps:
■ Removing the battery
■ Removing the service door
■ Removing the fan
Required tools:
■ Screwdriver: Phillips PH00
■ Plastic tool
► Remove the four M2.5XL6 screws (yellow circles).
► Place the opened notebook on its side and carefully press on the openings against the underside of the keyboard to
release the keyboard from the casing. Hold the keyboard with your other hand to prevent it from falling out.