Fujitsu control 4 0812 - Starting the Software

2.4 Starting the software
2. Select the KVM s4 entry.
3. Click the Change/Remove button. The uninstall wizard starts.
4. Click the Uninstall button and follow the on-screen instructions.
To uninstall the software on Microsoft Windows operating systems, using a
command window, complete the following steps:
1. Open a command window and change to the KVM s4 install directory used
during installation. The default path for Windows 32-bit operating systems is
the program files directory.
2. Change to the UninstallerData subdirectory and enter the following
command (the quotation marks are required):
“Uninstall KVMs4 Software.exe”
The uninstall wizard starts. Follow the on-screen instructions.
To uninstall the software on Linux operating systems, complete the following
steps:
1. Open a command window and change to the KVM s4 install directory used
during installation. The default path for Linux systems is /usr/lib.
2. Change to the UninstallerData subdirectory and enter the following
command:
% sh ./Uninstall_KVM_s4_software
The uninstall wizard starts. Follow the on-screen instructions.
2.4 Starting the software
To start the software on Microsoft Windows operating systems, complete one
of the following steps:
• Select Start-Programs-Fujitsu KVMs4 Software.
• Double-click the KVMs4 icon.
To start the software on Linux from the application folder (the default location
is /usr/lib/KVM_s4_software/), complete one of the following steps:
• If the /usr/lib directory is in the PATH, enter the command:
% ./KVM_s4_software
• Change directories to /usr/lib and enter the following command:
% ./KVM_s4_software
• If a desktop shortcut was created on installation, double-click the shortcut.
590-1059-640A
11