Fujitsu control 4 0812 - Appendix D: Ports Used by the Software

Appendix D: Ports used by the software
Appendix D lists the port numbers that the software uses to
communicate with certain switches. This information can be used to
configure firewalls to let the software operate in the networks.
Port Number Type Purpose
3211 TCP Proprietary management protocol
3211 UDP Proprietary installand discovery protocol
2068 TCP Encrypted keyboard and mouse data
2068 TCP Digitized video data
2068 TCP Virtual media
Table D.1: Ports Used by KVMs4Client Software
590-1059-640A
75