3. Explorer
The switch will attempt to detect if Java is already installed on your PC. If it is not, in
order to use the web interface, download the latest version of Java Runtime
Environment from http://www.java.com and associate the JNLP file with Java
WebStart.
To change RDP options:
1. Select Tools-Options from the Explorer. The Options dialog box appears.
2. Click the RDP tab.
3. In the RDP Application to Launch field, enter the directory path and name or
click the Browse button to locate the path and name.
4. Enter command line arguments in the box below the path and name.
— or —
To insert a predefined macro at the cursor location in the command line,
click the Insert Macro list box and select a macro from the drop-down
menu. The Explorer will automatically replace these variables when the
application runs.
5. Enable or disable the Launch in command window by marking or clearing
the check box. When enabled, the user-specified RDP application will be
launched from within an OS command window.
6. Complete one of the following steps:
• Click another tab to change additional properties.
• If finished, click OK to save the new settings.
• Click Cancel to exit without saving the new settings.
3.9 Managing folders
Use folders to create a customized organizational system for groups of units. For
example, you might create a folder for critical target devices or for remote target
devices. Folders are listed under the Folders button in the Explorer. You can
name and structure folders in any way youchoose.
To create a folder, complete the following steps:
1. Select the Folders button.
2. Complete one of the following steps:
• Click on the top-level Folders node and select File-New-Folder.
590-1059-640A
34
To Next Page
Loading...
