Fujitsu control 4 0812 - Adjusting Mouse Options

4. Video Viewer
Area Description Area Description
1 Image capture width 9 Automatic video adjustment
2
Pixel sampling fine
adjust
10 Refresh image
3
Image capture
horizontal position
11 Adjustment bar
4
Image capture
vertical position
12 Video test pattern
5 Contrast 13 Performance monitor
6 Brightness 14 Close button
7 Noise threshold
8 Priority threshold
Table 4.5: Manual Video Adjust Window Areas
4.8 Adjusting mouse options
The Video Viewer mouse options affect cursor type, scaling, alignment, and
resetting. Mouse settings are device-specific; that is, they can be set differently for
each target device.
Cursor type
The Video Viewer offers five display choices for the local mouse cursor. You can
also select no cursor or the default cursor.
To change the mouse cursor setting:
1. Select Tools-Session Options from the Video Viewer menu. The Session
Options windowopens.
2. Click the Mouse tab.
3. Select a mouse cursor type in the Local Cursor area.
4. Click OK.
Scaling
You can select any of three preconfigured mouse scaling options or set custom
scaling. The preconfigured settings are: Default (1:1), High (2:1) or Low (1:2), as
follows:
590-1059-640A
56