Settings in BIOS Setup Main - system functions
18 A26361-D943-Z120-14-7619
Boot Sequence
defines the sequence in which the system BIOS searches the drives for system files
to start the operating system. If you wish to change this sequence, place the cursor
on the entry for the drive you to which wish to move forward (
[+]
[+][+]
[+] key) or back ([-]
[-][-]
[-]
key).
Default entry:
1. 1. Diskette
2. Hard Disk
3. CD ROM
Video Display
This field is used to specify the type of monitor connected.
EGA/VGA, Color 80, Monochrome
Default entry: EGA/VGA
Base Memory
This field indicates the size of the available base memory below 1 Mbyte.
Extended Memory
indicates the size of the memory above 1 Mbyte.
To Next Page
Loading...
