Fujitsu D943 - Biosfax Menu - Quick Start Functions; Receive Mode; Ring Count

BIOSFaX - quick start functions Settings in BIOS Setup
A26361-D943-Z120-14-7619 45
BIOSFaX menu - quick start functions
With the BIOSFaX menu you can select whether your system can be switched on
via modem and whether an abbreviated system startup is executed. During this
system startup any incoming call or fax is stored.
Phoenix BIOS Setup
Main Advanced Security Power
BIOSFaX Exit
Receive Mode: [Disabled]
Ring Count: [Auto]
Fax Tone Count: [Auto]
Fax Modem Port: COM3
Item Specific Help
——————————————————————
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
← → Select Menu Enter Select Ê Sub-Menu F7 Previous Values
Example for BIOSFaX menu
Receive Mode
Requirement: Remote on functionality (Remote on) must be enabled.
This field determines the mode in which the modem is operated. Depending on the
setting, any incoming message will be recorded.
Voice and Fax Any incoming call or fax will be recorded.
Voice Only an incoming call will be recorded.
Fax Only an incoming fax will be recorded.
Disabled Modem functionality is not available when the system is switched
off (default entry).
Ring Count
Defines how often a ring tone should sound before the modem answers. Possible
settings:
2, 3, 4, 5, 6, 7 or Auto (default entry).