Power Settings in BIOS Setup
A26361-D943-Z120-14-7619 41
Power Management Mode - Extent of energy saving functions
This field defines the extent of the energy saving functions.
Customize The functions set in the fields Standby Timeout, Hard Disk Timeout
and Standby CPU Speed are effective in power management (default
entry). (Default entry).
Maximum, Medium or Minimum Power Savings
These entries call predefined settings, thus determining the extent
of energy saving.
Disabled None of the energy saving functions is effective.
Standby Timeout
Requirement: The Power Management Mode must be set to Customize.
This field defines the amount of time without system activity the PC is to wait
before switching to standby mode. In standby mode, the screen is dark and the
processor clock is set in accordance with the entry in the
Standby CPU Speed field.
The next wakeup event terminates standby mode again
2 min, 5 min, 10 min, 15 min, 30 min
Default entry = 15 min.
Disabled
The PC does not switch to standby mode.
Suspend Timeout - Suspend mode
Requirement: The Power Management Mode must be set to Customize.
This field defines the amount of time without system activity the system is to wait
before switching to standby mode. In standby mode, the screen is dark and the
processor is switched off.
The next wakeup event terminates suspend mode again.
In a network environment
Suspend Timeout must be disabled, otherwise data transfer
will be aborted.
2 min, 15 min, 30 min, 1 Std, 2 Std, 3 Std, 4 Std
Default entry = 15 min.
Disabled The PC does not switch to suspend mode
To Next Page
Loading...
