Fujitsu D943 - Upgrading Main Memory

A26361-D943-Z120-14-7619 51
Add-on modules
1
2
5
4
3
8
6
7
1= FlashBIOS
2 = Lithium battery
3 = Processor with heat sink
4 = Locations bank 0 for main memory
5 = Locations bank 1 for main memory
6 = Location for second-level cache
7 = Socket for video memory
8 = Slot for wavetable board
Upgrading main memory
Four locations (bank 0 and bank 1) are available on the system board for installing
memory modules. The board supports a maximum of 128 Mbytes.
You may use memory modules of 4, 8, 16 or 32 Mbytes with or without parity
check.
!
You ma
y
onl
y
use fast memor
y
modules (access time = 70ns or less) or
EDO memor
y
modules (access time = 60ns or less)
In other words,
y
ou fit the first
p
air to bank 0, and the second
p
air in ban
k
1. Pairs of memor
y
modules must have the same ca
p
acit
y
and the same
access time.
i
The ECC error identification is onl
yp
ossible for modules with
p
arit
y
checks