Add-on modules Upgrading main memory
52 A26361-D943-Z120-14-7619
Installing memory modules
1
2
Ê Insert the memory module at an angle into the appropriate location (1).
Ensure that the key notch and the two holes are correctly aligned with the
retaining pins.
Ê Tilt the module down until it snaps into place (2).
Removing a memory module
1
1
3
2
Ê Carefully push the retaining clips at each end of the module outwards (1).
Ê Tilt the memory module forwards (2), and pull it upwards and at an angle out
of the mounting location (3).
To Next Page
Loading...
