Security menu - Setting up the security features Settings in BIOS Setup
A26361-D943-Z120-14-7619 33
Menu Security - Setting up the security features
You can set up the following security features in the Security menu:
• Protecting BIOS Setup (in the field marked
Set Setup Password)
• Protecting BIOS of add-on modules (in the field marked
Setup Password Lock)
• Protecting system boots (in the field marked
Set System Password)
• Locking input devices (in the field marked
System Password Mode)
• Prevention of system boots from floppy disk (in the field marked
System Load)
• Displaying Setup message (in the
Setup Prompt field)
• Virus Warning (in the field marked
Virus Warning)
• Prevention of write operations to floppy disk (in the field marked
Diskette
Write
)
• Write protection of System BIOS (in the field marked
Flash Write)
• On/Off functionality (in the submenu
Power On/Off)
Phoenix BIOS Setup
Main Advanced
Securit
Power BIOSFaX Exit
Setup Password Not Installed
System Password Not Installed
Set Setup Password: [Press Enter]
Setup Password Lock: [Standard]
Set System Password: [Press Enter]
System Password Mode: [System]
System Load: [Standard]
Setup Prompt: [Enabled]
Virus Warning: [Disabled]
Diskette Write: [Enabled]
Flash Write: [Enabled]
Ê Power On/Off
Item Specific Help
——————————————————————
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
← → Select Menu Enter Execute Command F7 Previous Values
Example for Security menu
Setup Password / System Password
These fields indicate whether the appropriate password is installed or not.